|
Deer Feeders and Deer Feeder Accessories. Protein deer feeders, Deer Feeders, Automatic Deer Feeders, Game Deer Feeders, and more. High quality deer feeders from Boss Buck Inc. Feeders for Deer and other wildlife.
|
The 1200lb. capacity hopper is 3/8" thick wall of HDPE UV Protected plastic that will not rot, rust or leak!
Our hopper has built in channels that the legs fit into. Adjustable hardware components allow
you to adjust the height for conversion from automatic timer feeding in the fall, to gravity
feeding protein through the summer months. Our feeder is built to be rock solid, water proof,
and resist condensation.
We designed the lid with a loose fit to allow proper ventilation for protein pellets. Our lid
system locks the lid down, but allows the hopper to acheive ambient temperature quicker
than steel or fiberglass. This helps keep the feed fresh and as free as possible from moisture.
The lid has a 2" overlap onto the hopper so water cannot get under it. The Non-Typical hopper only
weighs 60 lbs. so moving the feeder even into remote locations is a snap! You don't have to have
a truck to move it. Your 4-wheeler and any small trailer will do. We do suggest that you
get a buddy to help you raise it and lower the system.
T-Post Foot Pads (Exclusive)!
The Non-Typical foot design is completely unique! The feet are designed to except
a T-Post through the center of the foot. The feet are large 7" square steel plates.
Each foot has a large nut welded to it and a ½" bolt that when tightened secures the feeder to
the T-Post. This will not only protect the feeder but keep it level and imobile.
Boss Buck recommends using the Feeder Filling Station® to fill your Non-Typical. Portable,
safe, fast and afforadable. The Feeder Filling Station® is a must for making short work of filling up feeders!
We timed it at 17 minutes to fill the entire Non-Typical with corn. That's 24 bags! Now that's fast!
It only cost $329.00 too! That's the best part.
Height adjustable from 108" to 132".
Protein 4-way feeding height 40".
Hopper 61" tall x 43½" wide.
Hopper weight 60lbs.
Legs 105" 1½" - 14 gauge galvanized steel.
All galvanized hardware and stainless steel inserts.
VERY IMPORTANT INFORMATION: If converting a 1200 lb protein to a 1200 lb automatic you will need the
stop bracket plate.
(See image below) or click here.
Converts from protein to spin feeder in minutes!!
Download Instructions Here
|
| Closer look at the features - (click) |
 |
 |
 |
 |
 |
|
|
Accessories - (Click)
|
Cut-Off Valve
|
Auto Feed Kit
|
Feeder Filling Station
|
|
Click to enlarge
|
|
